mas985's latest activity
-
mas985 replied to the thread Aqualink re-prime on Solar?.Ok, that is fine and should not be part of the problem. Not that I can see. It is odd they do not provide a mechanism to up the speed... -
mas985 replied to the thread Aqualink re-prime on Solar?.I did miss the responses, thanks. VRV location should never be lower on the return pipe. Pressure is much lower there to keep it closed...
-
You might have missed his answers: The top of the array is ~12' above the surface of the pool the VRV is about half that height on the...
-
mas985 replied to the thread Equipment for New Build.The Master Temp 400 has an internal bypass: This is much better than heaters without a bypass such as most heat pumps but not as good...
-
-
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.One more thought. Is the clock on your P4 constantly running fast or slow? How many minutes per day/week? There have been reports of...
-
mas985 replied to the thread Aqualink re-prime on Solar?.I have the Hayward AquaLogic controller. How high are the panels installed? Where is the VRV installed? What is the filter pressure...
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.You have a standard EW11 correct? Can you confirm the baud rate is correct? 19200
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.The script uses the keep alive for timing purposes and I did some timing measurements from my unit and they come in at 100 ms intervals...
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.Just curious, does the IOS app work too?
-
I replaced the script with a modified one.. changed these variables. TIME _GAP = 6 KA_NEXT_TIME = SYSTIME + 60 - TIME_GAP DT= DT+60 and...
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.Did you remove the script?
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.This is the code for the filter button. See if you can send it: 100200028000800001141003 Also, with the app, see if you can try...
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.It should be sending the same codes as what the local controller does. The only thing I can think of is the timing is different with...
-
Troubleshooting success again! I checked the P4 mode box in settings, and am getting the display text coming over. Turning on the...
