Recent content by jseyfert3

  1. jseyfert3

    Does Liquid Chlorine Rust AGP?

    Bleach is an oxidizer, rust is oxidation. Concentrated bleach rusting metal is expected. In concentrations used in pools it will have some effect but it will be minimal, bordering on undetectable.
  2. jseyfert3

    Unable to balance

    For the app, first log your test results when you do the water tests. Click "new log" then "log test results". Fill in any numbers you tested (leave blank ones you did not test) and click the check mark to save. Now your test results should be on the "overview" page. They will list time since...
  3. jseyfert3

    Just Bought a 26' Intex - Looking for suggestions on upgrades as I start the planning/build process

    Curious, what sort of base did you have under the pool? Without foam, and a type of soil sufficiently hard, they probably aren't needed... Intex doesn't call for them on the round pools, only for the retangular pools. I won't skip them on furture pools myself though, and don't recommend...
  4. jseyfert3

    Just Bought a 26' Intex - Looking for suggestions on upgrades as I start the planning/build process

    The downside to water clarity is you perfectly see all the junk at the bottom of your pool!
  5. jseyfert3

    Just Bought a 26' Intex - Looking for suggestions on upgrades as I start the planning/build process

    OH YEAH! One of the friends we had over for the weekend asked if there was chlorine in the pool! Obviously, there was, but unlike commercial pools, you can't smell it. That, and water clarity, are probably the two best things about TFP pools.
  6. jseyfert3

    Just converted from baquacil to chlorine and have been told I have a chlorine lock

    The FC and CC tests will always turn pink if left to sit. If you were to not add the CC testing reagent immediately after testing FC, the test would start going pink there as well. When doing these tests, the endpoint is as soon as it goes clear. Do the FC test, and as soon as it's clear add the...
  7. jseyfert3

    Intex Sand Filter/Pump Slowly loses flow

    Yes, that's not mutually exclusive. I think what he was getting at is cloudy water is often a chemistry problem (things are growing) rather than dirt. For example, on my hot tub if I failed to add chlorine for a while before I had a SWCG the water would inevitably go cloudy.
  8. jseyfert3

    Just Bought a 26' Intex - Looking for suggestions on upgrades as I start the planning/build process

    I forgot to mention the ladder is a high priority upgrade. After looking at some threads here on TFP I bought a Confer Plastics 7200 plus the required ladder adapter kit for rigid soft sided pools. Found the ladder for $275 shipped from intheswim and the ladder adapter kit was $58 from Confer...
  9. jseyfert3

    Intex Sand Filter/Pump Slowly loses flow

    Sounds like the filtwr getting plugged. The one on mine can do that very quickly. It can be fine for days if nobody is in the pool, but a bunch of people getting in and out tracking in dirt and I literally had it go to almost no flow in a matter of hours. A quick backwash foowed by a quick...
  10. jseyfert3

    Just Bought a 26' Intex - Looking for suggestions on upgrades as I start the planning/build process

    So, I need: A proper skimmer. A robot or other auto cleaner. The biggest issue is leaves, which, as there is no skimmer, eventually sink and pool in the middle. They also start breaking down and leaving leave bits in all the seams and wrinkles. The pool came with a garden hose powered vacuum...
  11. jseyfert3

    AGP Rust from SWG

    Not a problem for the OP...cause the warranty is void if any part of the pool is buried, and they are going to bury it 2'. 😁
  12. jseyfert3

    'Hibernate'/Shut Down Hot Tub for the Summer

    Depending on your specific model there may be a drain valve inside. If I remove the equipment panel on mine, there is a drain hose with valve that will not only empty the spa, but drain both motors as well. If you drain (probably the easiest option), shut the power off. You should have a...
  13. jseyfert3

    Low flow Intex sand filter pump

    Did it originally flow fine? If so, what's the pressure gauge reading compared to what it did when it used to flow fine? When you rinse after backwashing how does the flow to waste compare with that during backwashing?
  14. jseyfert3

    AGP Rust from SWG

    I'd be much more concerned about rust from burying an above ground pool that's not rated to be buried than I would be from adding a SWCG.
  15. jseyfert3

    Picking up home fermentation/brewing

    Carbonation at room temp (~70 °F) at 28 psi worked well. I connected the kegs, shook for a while till the regulator stopped hissing, then left on the regulator for a few days. Once I got my kreezer working I bled off all the pressure in the headspace, connected both kegs to the manifold and...