Recent content by Josh_Leatha

  1. Josh_Leatha

    Best way to get started

    Thanks Patrick_B that's what I needed to know. Wasn't sure what is best and easiest to do.
  2. Josh_Leatha

    Best way to get started

    So this is going to be our third attempt for having fun and clear AG pool this summer. We've not had very good turn outs and last year I found this group and learned about the BBB and slamming methods...... Now I need help to see what is going to be best at getting the pool cleaned and going. We...
  3. Josh_Leatha

    Seeing debris

    Yes I turn the pump off before moving the the value to close, back wash, rinse and filter. Yes there is a sight glass and that must of been my issue. I let it stay on rinse for a few mins longer then I normally do and made sure it was really clear not almost and now it didn't blow debris back...
  4. Josh_Leatha

    Seeing debris

    Pool had been doing great all summer after I had to slam all of May. Got everything cleaned out and levels where they should be. Anyways this past Saturday I was vacuuming the pool like I do every sat morning. Mid way through I stopped to clean out the leaf basket cause the flow slowed down...
  5. Josh_Leatha

    Having issues getting pool clear

    Ok so two more days of SLAMMING and scrubbing and vacuuming. I don't know how much cleaner and clearer it can get or where algae is hiding. ......added bleach waited 30 min and tested FC. Will test again in the morning and see where we are at. Crossing fingers. ......... Sent from my...
  6. Josh_Leatha

    Having issues getting pool clear

    ok so last night I added 3 gal of bleach and waited 30 mins and tested the FC at 22.5 ......... this morning I got up tested the FC and it was at 20.5 ....... so does that mean I still have algae lingering around and still need to continue SLAMMING my pool and vacuuming daily? Also yesterday...
  7. Josh_Leatha

    Having issues getting pool clear

    ah awesome I can handle that thanks Sent from my SCH-R970 using Tapatalk
  8. Josh_Leatha

    Having issues getting pool clear

    So what do you all think? All I have now is cotton from the cotton trees and little dirt that has settled the last few days. Wasn't understanding the over night test thing so I've just been keeping the FC around 10 or so give or take and vacuuming every other day. Sent from my SCH-R970 using...
  9. Josh_Leatha

    Having issues getting pool clear

    Thanks I knew I seen it !
  10. Josh_Leatha

    Having issues getting pool clear

    ok so it's been 5 days since I've posted any updates..... I've been keeping the SLAM level right around the 20 range give or take a few numbers up or down and the pool is looking great!!! We've had rain storms roll through almost every night but not much debris has been blown into it, lucky...
  11. Josh_Leatha

    Having issues getting pool clear

    This morning FC was 18.5 Added the other half gal and let it run a few hrs. It was really starting to clear up more and while on a latter I could really see leaves and other debris in different spots. Vacuumed some in those areas and brushed the rest making it semi cloudy. Going to let it...
  12. Josh_Leatha

    Having issues getting pool clear

    Ok so vacuumed as much as I could and had my pole extended as far as it would go I had to get in to reach the middle and I think all the leaves and debris are gone. I don't see any dark spots in the pool anymore. FC tested at 18 so added half gal I hope a few more days of vacuuming and...
  13. Josh_Leatha

    Having issues getting pool clear

    woke up this morning and tested FC at 13.5, and could see some algae particles floating and so skimmed them off as best as I could....... I plugged that number into Pool Math and it said 1 lb 2 oz so I added 1 gal of bleach, went to brunch...... ( and that was after we had a big thunderstorm...
  14. Josh_Leatha

    Having issues getting pool clear

    FC just came back as 21.5 Sent from my iPhone using Tapatalk 17,205gal, 27x52 AG, 300lb Cristal-Flo II sand filter 145362C, 2hp Dynamo 2speed pump DYNII-N2-2, Install date June 2012, Hayward Aqua Critter ( have not used )
  15. Josh_Leatha

    Having issues getting pool clear

    That's what I said last night ! ;) It's going to be me! L Sent from my iPhone using Tapatalk 17,205gal, 27x52 AG, 300lb Cristal-Flo II sand filter 145362C, 2hp Dynamo 2speed pump DYNII-N2-2, Install date June 2012, Hayward Aqua Critter ( have not used )