Recent content by JesseJames

I have IC20 SWG installed. Thinking about upgrading the salt cell to IC40. Can I continue to use the IC20 Power Center with the IC40 Salt Cell? Thank you.

I removed some sprinkler heads and PVC pipe. I capped off the pipes along the edge of my lot and was able to use them again after the pool was finished.

I wear gloves and also have the eye protectors, but often forget to use them.

I have had the high salt problem too. My test were saying one thing and the SWG another. I drained water three different times and finally the blinking lights went away. So, I really did have too much salt and you probably do as well. You might try shutting the system down and...

You gain confidence with time. Test everyday for a week and you will be a pro. :)

Here is something to try if you haven't already: Before you turn off the power make sure the cell is off (0 percent). Then restart. I have found this works on my IC20 with a similar issue. .

I have had some mild scale on tile before. I sprayed it with WD40 and was then able to wipe it off with a cloth. In your case, maybe WD40 and a stiff brush might do the job or at least help a little.

There may be reason to be leery of the pool store too.

Re: Got the TFT 100 test kit and tested water.. But now what Tks! :)

Re: Got the TFT 100 test kit and tested water.. But now what Just wondering why the FC should be @ 10?

I do not use bleach and do not buy chlorine. Once your salt is at the proper level you will rarely need to add. So, keeping a bag or two on hand is very sufficient. I use about one quart of muratic acid every five days and a couple of pounds of baking soda once in a while. I also add a...

Like night and day for sure! Looks amazing! :)

I use the Taylor Salt Water Test Kit K-1766.

You can do it, Lewis! :)

I get the same shade of red (TA) and the same shade of blue (CH). :goodjob: