Recent content by Jbarnes1

Videos of pump and air coming out of the jet. We have 5 jets and bubbles only come out of 3.

We have tried running at different speeds with no success. What would the next steps be to try to clear the air? Here is our setup. I don't know if it is relevant or not but our chiller/heater had never chilled. It throws the code HP3 everytime: Low water fl ow TO the unit or faulty high...

Yes pump is running and I can see bubbles. We have always been able to see bubbles in the pump but last summer didn't have issues with jets shooting bubbles into the pool. I wish I could attach videos showing the different speeds at which the bubbles shoot out and what the pump looks like running.

It is much clearer than when I started. I am starting to think there may be another issue. We have had issues with 3 out of 5 of the returns shooting bubbles/air into the pool and we were told it was the SWG. Well the SWG has been off for days while completing SLAM and I saw no difference in...

Thanks for the help. The SWG has been off since starting the SLAM process. I finally finished the process today but still see these small bubbles.

Thanks everyone! I'm not sure why the original 4 gallons of stabilizer at the beginning of the summer didn't do anything. I added 3 gallons of the same stabilizer yesterday and it did increase CYA to just above 30. We are at 6 gallons of liquid chlorine now and with a little drop this afternoon...