Recent content by HQPools

Yes, the AquaRite can be connected to the OmniLogic as a slave. Use standard outdoor rated 4 wire for the connections to the two systems via the Green, Yellow, Black and Red wires on both systems. The AquaRite will need to have the jumper removed so it acts as a secondary. Once it is removed...

Looks like a Paramount floor cleaner valve.

A closing plug in the skimmer and another in the return will stop the flow from both ends

How much is it leaking over what period of time. And does it leak with the system running as well as when it's off.

You said the tcell was two years old. Is the control panel the same age. If so, Aqua Rite warranties are usually 3 years. You can find out by looking at the serial number on the door. The first number (usually 3) is the warranty years. Anyway, if the lights aren't working, the problem won't be...

You don't need to plug it. Put the cell on its end in a bucket and only fill the bucket until half the cell is submerged. Acid clean that end and then turn the cell over to clean the other end. Don't worry about the cord, it's water tight.

I don't know what type of pool you have, but vinyl liner could be mold underneath. Plaster pool could be black algae. Neither one of those will just brush up. Black algae looks likesmall black spots and can be treated with copper algaecide. I dot know what to suggest if it's mold under a liner.

The leak isn't coming from the spider gasket if it coming out from the handle. There is an oring on the handle shaft. You'll need to compress the spring to get it back together.

Are the Jets turned on. Turn the bezel, on each jet, counter clockwise.