Recent content by gspivey79

Yea I just ordered a cheap 200$ 2hp pump to finish the season. I will get someone out to give me a quote on pulling actual 240 out there from my breaker box. I’m sure it would be a few thousand.

I’m only getting around 120v on that. So I’m assuming this isn’t a 240v run and its just “wired” to appear as one so they could charge me for it.

Ok so I moved the red wire but same error.

OK So I changed those around as you stated but I still get E-08 which is low voltage alarm.

The breaker used is by my finger.

I have not checked with my meter yet. Based on the wire color I was assuming it was 240. I can look at the old pump as well to see if it was only a 120v. This is a single breaker 20amp in my box. Not sure if that makes any difference.

OK, maybe a dumb question but would I just move the first red wire over to the first black wire and tie together? Would that give it constant power?

Hi all Ive been a long time pool owner. I have always had above ground pools in the past but during COVID we splurged and installed an inground. I have learned A LOT about maintaining and working on things for myself through that. We had a horrible installer that did almost nothing correctly. I...

hi I replaced my single speed pump with a calimar variable speed pump. After wiring up I got a low voltage E-8 alarm. I am not sure how to troubleshoot this. I took some photos of the intelliconnect box as its wired. This is how installer wired, I didn’t change anything. It looks like the...