Recent content by GINADALE1

I am going to try that right before I close it up this weekend. I believe you are correct also

I am the only owner of this home.

I had the pool installed. the liner was the original request.

I dont recall, but when I needed to remove water during heavy rains, I would use a hose and run it out to the main sewer drain

Would you be able to send a photo of your pipe so I can compare the two?

Yes, that is what I am leaning towards also. Thank you

I am not confident the new owners of the pool company are completely sure nor familiar enough to confirm a concrete answer. I have noticed several things that were missed during opening the pool over the last few years. These overlooks would be enough to ruin all my equipment. When questioning...

thats what seems to be where this may be falling, the more comments that come in, the more I believe that is the case.

Yes, you cant see anything besides an empty pipe- the pipe is also a flexible pipe, not a standard PVC pipe that would not be flexible.

I do believe that is what this is, and should have been communicated to me since this could damage my pool if not properly maintained. The liners dont last for ever and if I needed to replace it during a time of heavy rains that could now cause problems with the bottom concrete and liner not to...

do you have a picture of it, but yes, the deadmans line is one of the things it could be. Luckily I havent had alot of rain, however there has been some rain in recent days, so if this is for that purpose, then I should try draining it out if I needed to lower the level down? Either way...

I appreciate all the trouble shooting tips you have been able to share. I am learning thats for sure. I saw something that maybe it is a sewer drain pipe for purposes of disposing of the water? But I am not sure how to go about that without digging out the pipe some and see where it goes or even...

No, they are all linked to the same pipe and they all are working. Also, I believe the pool company that installed it, accessed it every year either for opening it or closing it, you can see the indent marks from the tools used to remove the cap. Both caps seems to be accessed with same markings

Took Cap off, turned pump on, no air flow vacuum in that line. The other similar cap I assumed was to address the heater during winterizing?

UPDATE. Tried to use shop vac to push water out in hopes to see bubbles. Nothing. Any other suggestions? To make sure I did it correctly, I closed the main drain off while doing, was that correct?