Recent content by FREAKFISH

Good stuff, this is good information, why can't i find this stuff thru searches? I'm gonna read those articles you have listed, Mark

Adding this article because the other posts failed to mention maximum allowable levels and limits to be avoided. http://www.swimmingpoolsteve.com/pages/filter-pressure.html

Sorry but, "Calcium products should be spread across the surface of the deep end of the pool. " is not much to go on especially compared to what I found and posted above for instructions. For example, what about pelleted calcium chloride, can't spread that across the surface easily. it needs to...

Having same problem as Shadow Lord....exact same issue with tech support as well......any resolution?

Thanks, and yes pebbeltec is new as well... The ABC's does not tell "How" to add the chemical, just to add the chemical. I followed the instructions I posted earlier and the result was excellent...Im up to 330 ppm from 150 over two(2) days with ten pounds at a time.

Best answer Ive found so far....any comments??: Application Dissolve CaCl² in a plastic bucket of pool water. DO NOT add it directly to the pool as doing so can cause lime-scale to form a the point of contact where the un-dissolved chemical rests on the bottom of the pool Never apply Calcium...

I see plenty of posts and web searches that say "add Calcium Chloride" to raise calcium hardness. Got it. Now tell me "How to add the Calcium Chloride" some say dilute some not, some say so many pounds per hour...do not exceed, test after so many hours before adding more etc...blah blah...