Recent content by fastrunnerdude

  1. F

    Switching from Stabilized to Non-Stabilized Chlorine Pucks

    Thanks for the feedback. The higher HP pump is a VS pump and controls the water features (sconces, bubblers). The lower HP pump (non-vs) circulates through the IFCS. My skimmer collects plenty as-is but I could change the valve to have some flow from skimmer. I didn’t realize the picks in...
  2. F

    Switching from Stabilized to Non-Stabilized Chlorine Pucks

    See my drawing of my Venturi skimmer in my post above. I had my terminology backwards but returns from my pump to the pool come through both the skimmer and the in floor jets. This photo is not my pool but it’s an identical concept. The return running below the basket creates a suction that...
  3. IMG_0522.jpeg

    IMG_0522.jpeg

  4. F

    Switching from Stabilized to Non-Stabilized Chlorine Pucks

    I think this is the setup how my skimmer works I have a valve at my equipment that can take returns from the main drain in my pool, the skimmer, or partial flow from both. I normally keep it set to take 100% of returns through main drain and nothing back from the skimmer. When my pump is...
  5. IMG_0521.jpeg

    IMG_0521.jpeg

  6. F

    Switching from Stabilized to Non-Stabilized Chlorine Pucks

    My skimmer doesn’t send any water back to my filter and pumps. It only recirculates back into the pool. All the returns to the filter and pumps go through the main drain so not sure if that makes a difference.
  7. F

    Should I care about phosphates?

    I recently had a project on our pool deck done that resulted in a ton dirt and sand getting in my pool. It’s been vacuumed/cleaned out but the guy that did the project (he does pool maintenance too) told me I should add phosphate remover because all the dirt in the pool would increase the...
  8. F

    Switching from Stabilized to Non-Stabilized Chlorine Pucks

    Why shouldn’t you put pucks in a skimmer? I primarily use LC and have a stenner pump that pumps it into my system downstream of the filter and in the summer I’ll sometimes supplement with some stabilized pucks in the skimmer basket. I put them in the skimmer basket so the LC and pucks don’t...
  9. F

    Featured Best Places to Buy Liquid Chlorine - Reboot!!

    I’ve never had issues with their bleach. Before he changed to an automated system with the lockbox to start pump I had some issues with nobody being there when there were supposed to be open but now it’s great because I can go anytime. It’s about a 20 mile drive from where I live but I get 20...
  10. F

    Featured Best Places to Buy Liquid Chlorine - Reboot!!

    In Katy TX (west Houston suburb) Patriot Cleaning Supply sells bulk bleach for $3.25/gallon + tax. You have to bring your own containers and it’s self service but much cheaper than any store I’ve found.
  11. F

    Need help troubleshooting a Jandy Pro VS 2.7 HP pump

    Update: Problem solved- i discovered the removable lid on the pump inlet filter basket was letting air in. It seemed like there was debris on the rubber seal and it wasn't sealing. Once i cleaned the filter basket, lid and seal and put the lid back on everything is running fine now.
  12. F

    Need help troubleshooting a Jandy Pro VS 2.7 HP pump

    Here's the setup. The VS pump that has issues is the one in the back further away from the filter.
  13. IMG_0501.jpeg

    IMG_0501.jpeg

  14. IMG_0502.jpeg

    IMG_0502.jpeg

  15. IMG_0503.jpeg

    IMG_0503.jpeg