Recent content by ericstac1

Sounds like this is my best bet. The internet doesn't turn up any males to fit those Zodiac unions and normal PVC ones don't connect right. I'll just cut and rebuild with regular stuff, the heater isn't even connected to the propane anyway so its not like we used it.

JXI400p

thanks!! Here is my pad setup the heater is covered with plastic because we are expecting rain. I was thinking if I build a 90 to route from the top pipe to the bottom pipe I would need to mess with anything else. Let me know what you think.

I need to build a pipe to flow in place of this Jandy heater manifold. It seems like it should be easy enough right? A male on top, a little pipe to a 90 and a male on the side. My issue is not sure of the parts. Are these threads standard in the industry? It has 2" PVC and a Jandy Elbow that...

Moved from HERE. I'm down in Texas and the same issue.. I pulled my manifold out and its got a nice long crack in it. I placed a backorder for the part but they are saying it could be months and my piping doesn't have a bypass to bypass the pump.. I'm thinking about building a pipe that mimics...