Recent content by duckvader

Does anyone know what the input voltage is for the RS485 input on the Aquarite board. Is has +10 on it but I can’t seem to find if the input voltage is a range or it has to be 10v. Can I use a 12v dc power supply.

Rando, When connecting your RS485 to your Aquarite what cable did you connect to A+ and B-?

I was looking through the code I can’t seem to find where you specify what SWG you have. I am wanting to do the same thing @expo is wanting to do. I already have the filter psi and temp being sent to HA via an ESPHome sensor.

This is quite impressive. I have been looking at putting LED's around my fencing to give some ambient lighting. Thanks for some ideas and work.

Here is my setup. It's a Raspberry Pi with a Hifiberry DAC running Volumio the amp and speakers are a set from parts-express.com. The amp and raspberry pi are contained in a sprinkler box mounted to the same pole my pool light switch is on. With Volumio you can use a locally attached USB...

Well my pool has been opened since May 11th and my pool has never been clearer below are my last test results.

My kids are 8 and 11 and they love it. I have to admit it's a big slide, I can walk under it and never touch the bottom. I think once you watch your kids go down it a few time you will be ok with it. It's worth the extra money. Sent from my iPhone using Tapatalk

Yes I love it.

I know don't use the original tube to test your salt levels. I tried it and it looks like it made an eched ring around the bottom of the tube. I now used the tube that came with the salt test to test my salt levels. :)

I have gray coping around my pool and it blends in really well with the concrete. Here is a picture that I have from last year right after my pools was completed.

I know my 280 is having the same issue and I have noticed that the hose is not a flexible as it usually is when its warmer out. My pool is only 63 degrees so the hose stiffens up pretty quick. I am thinking about adding a couple more swivel joins to see if that helps any.

I have a 1.5" temp probe well plumbed into my return and I have a Dallas one wire probe in there and another Dallas one wire probe zip tied to the plumbing for outside temp. It's all wifi in a sprinkler system box out by the filter and pump. It's really easy to get setup.

Well I just opened our pool this week!!! We also switched over to SWG and I am trying to get all my levels in line and I was looking for a way to keep track of everything so I developed a website for it all. I know my levels are a little out of whack but I am following the Pool Calc...