DrNinjaman's latest activity
-
DrNinjaman replied to the thread Spa won't start after power outage..CYA is at 30ppm. (Though I haven't tested it in quite a while.) And my pool service place replaced the element again on their nickel... -
DrNinjaman reacted to ajw22's post in the thread Fixed my busted Ultralift undermount cover lifter with
Like.
Nice hack. As @RDspaguy can tell you, spas are not built to last forever. -
DrNinjaman replied to the thread Spa won't start after power outage..Salt's at 1628 ppm. Borates at 31, CH 120. I know that titanium is recommended, but I just bought the spa three years ago, so the heater...
-
DrNinjaman reacted to Mdragger88's post in the thread Spa won't start after power outage. with Like.
I’m thinking the zero point of the smarter spa got reset in the power failure. As for the heater- Titanium is recommended over incoloy...
-
DrNinjaman replied to the thread Spa won't start after power outage..Checked the water just now and the salt cell definitely didn't need to be running. It was running when I came out to check this morning...
-
We had a city-wide power outage for about an hour last night, and this morning when I went out to start changing the water for the...
-
DrNinjaman posted the thread Fixed my busted Ultralift undermount cover lifter in Spas and Hot Tubs.My spa is pretty big at 10'x8', so in the winter the cover can get pretty unwieldy and ultimately bent the tubes of the lift at the...
-
-
-
-
-
-
-
-
DrNinjaman replied to the thread When to buy a new spa cover?.I'd say when the vinyl outer fabric layer is cracked and toast is when you buy a new one. If the foam is water logged, you can replace...
