Recent content by dotseurat

Hello all -- I'm going into my 3rd summer of pool ownership in the New England Area having moved into a house with a pool. It wasn't until last summer that I got on board with TPF and Pool Math and it's been a tremendous help. I switched to Liquid Chlorine but it's been a bit of a pain and...

Hi there. I've asked a few questions last year (thanks for the help!) but never followed up with introducing myself. I'm about to hit my 3rd season of pool ownership after moving into a new house during the covid pandemic. It's been a journey and I'm holding steady thanks to advice I've read...

you are very fast to respond. I'm grateful, and glad I'm on the right. At this point, weekends over for me and its dark, so might have to wait until next weekend to give this a try, but excited with the possibility of getting this working again (or at least the first time for us) thanks again.

I found this post from last year where you were helping someone out with a similar problem. It sound like it might be the answer to my questions of whether I have to drain the pool first and if I have to first remove the outter piece of the jet: From: one-of-four-venturi-jets-clogged-need-help...

Yes, you are on to something -- I have 3 returns that have independent jandy values to shut them off -- a main return line, a water feature return line (I don't even know what that is, but suspect its a return port at the bottom of my pool), and the spa return line. It was towards the end of...

some more troubleshooting info - I end up plugging the jet return outlets and left the air valve open and then ever slghtly opened the jandy valve and water did indeed come shooting out. After that I just wiped clean the air valve and then just blew into it with my mouth and confirmed bubbles...

Thanks for the reply. I’ve never seen any bubble come out the jets with the valve open. As mentioned in my original post, when I indirectly restricted flow I did see water come out which sounds similar to what your suggesting. Should I see a strong stream of water pour out? Would a good way to...

Hello. I’m 1 year into owning an inground pool. I’m the third homeowner since I think it was installed in 1999. Part of our pool shown in the pictures is a spa seating area that has two jet outlets - one for each seat. The return jets work fine and have a jandy switch to turn them on and off...