Recent content by dcanora

This is my third T-3 so I don't think that's the problem. I appreciate the info - I'll do the SLAM and see what happens. Much appreciated!

Hello! Thanks for your reply. The cell only seems to be generating enough Chlorine to keep it at trace levels, and I'm beginning to believe the cell is faulty in an atypical way. As I mentioned above, when I pulled the cell to get it tested, 4 of the gaps between the plates were heavily caked...

Update: Still not generating. Been running at 100%, inspected cell and 4 gaps were heavily caked and rest were as clean as when I last cleaned the cell. Hayward sent me to an authorized dealer - they tested the cell but it passed w 4 working fins, even though it isn't providing my pool with...

Thank you. Will do!

I bought the cell in July, 2019. Kit ordered!

Seems the consensus is it's the cell. I was confused as the positive test at the pool store sent me looking for another cause... I've always used OEM cells. Any thoughts / opinions on other brands? Thanks again, everyone!

It's 3E19050. Looks like it might still be under warranty. Thanks!

Hello! I'm a pool owner, fairly handy when it comes to electrical stuff, and currently pulling my hair out trying to diagnose my Aqua Rite system. Happy to be here and thanks in advance for your help!

Hello! My Aqua Rite system has stopped generating chlorine. The T-3 cell is clean and tested good at the pool store. Device readings: Salt: 3100 (recently recalibrated) Temp: 91 (pool thermo says 88) Volts 27.3 / 27.0 Amps 2.57 / 2.63 Output 100% (usually ~30% but turned up to try to...