Recent content by DanK

Thats the first thing I did before I got my pool done was buy a tf-100 test kit I dont regret it a bit :cheers: and for all the reasons stated above you will need it .

go to haywards web site and look at the parts sheet for those pumps and you`ll see what is differant about each one.IM not positive on the super pump. BUT their power flo pumps just use a differant size impeller to go with the differant size motor hope it helps some. :)

Jason, this would be a great addition to pool school since PaulR worked so hard on it 8-) since it seams you guys(and Gals) have agreed on the proper procedures. I know it helped me alot. Thanks PaulR for taking the time to write it up!!!!

THanks guys . impeller looked good, theaded on fine (but i didnt spin it to check to see if it had any wobble) maybe its warped or something .gotopools.com is going to send me anouther seal kit. its not leaking the bad right now just alittle seeping but it was real milky looking when i first...

thanks spishex i followed the directions to a t do you think i got a bad seal should i just get anouther one and try again

t/a is now down to 210 ppm :wink: thanks FPM (ive been airating and adding acid since friday)

Thanks for the tip FPM :-D Ive been reading this site since may before i got my pool set up. This is a great site and I want to thank everybody for their time and info. Im glad i found it first before i set up my pool. :goodjob: IM airating and adding acid right now to try and get it down...

well i ment to say its hard to tell the diference in the yellow color for me anyway I thought it was off the scale so I checked it with the other test and it was 4 ppm FC and 0 ppm CC so all is good :goodjob: . my T/a was real high 350 :( so im trying to get it down now. oh on the t/A...

Thanks FPM i was just wondering . since they where talking about how inacurate the clorine test was . :-D

I have a hayward power flo 1hp pump it was used and I got it from a friend so i replaced the seals and o ring. now the pump leaks a little at the rear of the pump first it was a milky white color which lasted about 1/2 hour , then it stoped. now it leaks a little but seems to be just clear...

:-D how accurate is the ph side of the test ?