Recent content by Damsroy

Hi. Wondering why the cordless Polaris Freedom is never mentioned. Serious brand with long term experience in the pool cleaner space. Starting on year 3. With mine. So far no issues amd happy with the overall experience.

Still super happy with mine. I rune it tow or three times a week. Typically one run is enough to capture 95% of the debris. In the very rare occasion I'm not fully satisfied i put it back for a second run right after the first run is over. There is enough battery for the robot to run twice back...

@stevepoint i also have the situation with no notification at completion and the orange battery indicator while running. I don't call it an issue since the bot is still running and cleaning strong. Season 2 here we go.

Good question! My pool was finished in May 2023. Overall during the entire 2023 season I was putting 2 cups of MA per week to keep my PH on track. This year already the pools seems less demanding in acid but let's use 2 cups of full strength MA per week as the base line. I will be diluting MA...

Happy to report that following guidance's from @ajw22 and @eWiRED above I was able to make the acid pump running. Connecting the neutral to GFCI CB (and not to bus terminal) was the key Since the acid pump relay is powered by the main pump relay the acid pump shouldn't be able to run when the...

@eWiRED and @jesse-99 Thank you so much for following up! So much to do around the house at this time of the year that I put the acid pump automation project on hold. Back to doing MA manually for now. I hope to go back at it this week and will keep you posted. I need this done before pool...

Same here. SWCG works fine from the web link just doesn’t show on the Home Screen of the app. On the App home screen i see only Air temp, Pool Temp and Spa temp. How does one add SWC %?

Very clear. Thank you. Will adjust wiring as suggested and revert.

Neutral white wire connected to bus bar on the left hand side. No ground connected yet but don't think that would be the issue. So based on your response above that might be my issue with option 1 I was trying to do. My white neutral wire needs to go back to the neutral lug (the one in the...

@Flying Tivo this is what i was trying to do. To have the acid pump relay energized only when the pump relay was energized/the pool pump was running. So fat no luck. Hopefully an iaqualink guru here will be able to assist me with the wiring.

Hello, Trying to wire a new Stenner acid pump dispenser to my existing Aqualink rs automation panel. This is my panel: The relay I circled in yellow was not used and I found the harness not plugged in behind the upper cover. I tried to wire the transformer using the below option 1 from...

I remember reading in the manual that it has to be stored protected from the element. I have mine in a deck box similar to the ones used to store towels and pool toys.