Recent content by CoolPool131

Does look like a better option and released after we got our pool up and running. They should give it to me free 😃or at least a discount! I'll see how this runs on the Spectrum 2G before without going through the AP for now.

I thought of the cable thing before but don't have one that long. I remember something about special characters in the SSID on some previous posts before but the RUCKUS did NOT have them in the 2G Network SSID Name. The Spectrum did however when I tested it. I changed the Spectrum Router 2G...

Correct. That IP is showing on the Ruckus AP. Spectrum main router is 192.1.168.2 to 254. Seems to be getting to the AP though but not resolving into 1 192 address like all the other connections on the 5G network. The Spectrum router is a little farther away (not much though, my phone can...

Yes, Engenius does take time to reboot and the counter displays on the panel. It's connected to the panel via POE. I can also yank it off quickly and check the back lights for PWR, lan1 (POE), wlan. They are all on after about 86% passes. I think one of the issues is I'm seeing no bars on the...

We are at 1.064. The website lists 2.017 but no download is available.

Holding Reset button for 10 seconds didn't work.

Wifi all of a sudden stopped working. I can browse all the networks and select one of the 2Gs we have setup then never connects. I have a spare new Pentair 523557 EnGenius Wifi module with antennas I swapped out and it's doing the same thing. Let me try the reset button.

Anyone know what the Reset button does on the panel if you hold for 10 Seconds? I know if you press for 1 or 2 seconds the panel LED screen will reboot. Trying to troubleshoot an issue and ran across other posts that pressing for 10 seconds fixed the issue but I don't want it to be blowing...

>>> 1 Pentair Rainbow In-Line Automatic Chlorinator I was wondering that too. We have a smaller pool, 11K gallons. That is a huge pool, design looks nice.

Couldn’t find a two wire so got a 4 wire outdoor wire from Lowes. Got it done, put some protector around it also. Also had to replace the heater thermostat that failed. Heater was throwing error and high temp readings up to 129. Heater approaching 3 years old. Thanks all!

Ok, took more of a look, looks like the corner section of the heater panel just needs removed. Going to pull it apart. Thanks all.

I could do it, have to see where it routes to. Just seeing if splice kits would work maybe but looks like they may require a heat gun.

This wire is apparently a com wire running from the Intellicenter into the heater. We lost control on the app. Any easy way to fix or does the entire wire need to be replaced?