Recent content by CobraFast1

Ahhhh, finally I found the solution. The Model CPSC24 can use either the internal or external timer to control the unit's start and stop time in two different cycles. Mine was set to external, so the menu would not bring up the questions to answer. One needs to go into the Technician's Menu...

I'm not familiar with the Aqua Bug, but you might consult your local pool supply shop. If they sell them, they usually will service them I have a Hayward and I've rebuilt is 2-3 times over the past 6.5 years. I let it run often for long periods (Days) to keep the bottom clean, so I have to...

Thanks for the rundown on the decalcifying the plates. I just converted to salt water and was wondering how to tell when they are clean. My manufacturer (Compupoo) recommends 5 parts water to 1 part acid for the cleaning.

I run my pool filter about 10 hours per day. From 8AM to about 6PM. I have a water falls and I like to hear the water running. Night time is only running if we have guests, so the water falls is working. I also leave Mr. Hayward (our Hayward bottom creeper cleaner) in there most of the time...

I have a Hayward filtering system and I flush with a hose and nozzle every 7-10 days during the summer months. Every two weeks in the winter, when there is less use. I use a standard garden hose with a nozzle and get the nozzle into a fine stream and flush from the top of the filter down...

Hi Everyone, I'm new to this forum. I've had a pool here in Florida for almost 7 years. I just converted it to a salt water system. I'm using the CompuPool CPSC24 system. My QUESTION IS: How can I set the 2 cycle timers of the unit? Background: I can set the time using the SELECT...