Recent content by chucklh

This has worked well for me Solaxx PH Tek Acid Feeder

I use the standaard 31% cut 50/50 with water and easy to install........

I have been using one for 2yrs with Mur-acid cut 50/50 it works great for me, set it and forget it.

I use a solaxx acid pump and mix 1 to 1

I do have the speedstir and love it. I hold the FC at 6 with a CYA of 60

Mine does the same thing, never turns red, just pink and has never turned blue, I have put a half a bottle of 0012 and it went clear. What I have been doing is going to the pool store, they use Taylor drops and I watch them do the test counting drops and it turns red and then blue and I dont...

My pool is not a year old, the Gunite was cheaper than the liner quotes we recieved ..

I have also loaded it on my Transformer.......

That is really NICE............

Disconnect the Equi Grid bonding wire from the motor and put a meter on that.......

Richard made me buy mine he just doesnt know it, and I use it all the time its a good tool..........

I dont know if all states do this but in Maryland when all of your permits are satisfied, electrical, plumbing, building, you or the pool builder will call for a final inspection in my case I had to do it, they will come out and check that all permits are closed and make sure all safety devices...

Make sure you have an occupancy permit for the pool........

Testing

I have about 1600 sq ft of travertine around my pool including the coping, its actually a paver not a tile its 1 1/8" thick, finished the pool deck just after Thanksgiving had a pretty good winter in Maryland and all I have seen is a couple of corners chip and I have not color enhanced or sealed...