Recent content by cedarcircle

We are in pool heck here. The pool was totally renovated last fall. We filled it and it looked great after the water cleared. Everything seem to work well except that we had a small leak from the Hayward pump. We decided to fix that over the winter. Anyway we noticed that the water level would...

The deck is approximately 42" on 3 sides and about 78" on the 3rd side. I've attatched an image which shows the layout.[attachment=0:2vgl5lwz]056.JPG[/attachment:2vgl5lwz]

I have a 20 x 40 inground pool that was just renovated. It has a pebble finish and a marble paver deck surround. I have been looking online for a mesh cover. Most want you to drill holes within 18-24 inches from the pool edge to put in anchors. I would rather not due that since the marble is so...

It is tahoe blue pebble tec. It has been about 3 weeks since we filled it and there is still a lot of white dust which settles on the steps and bottom. We have been running the filter for about 10 hrs per day and the polaris cleaner 6 or 7 hrs. It stirs up the dust but the pool is still cloudy...

We had the builder back out and he said everything is ok. It is still cloudy and he said that was due to the plaster curring. We have to add small amounts of acid ever couple of days. I am concerned about how long it will remain cloudy. The ph is 7.4 this morning.

We just had a total renovation of our gunnite pool which is 20 x 40. The deep end was brought up to just 5" and a pebble tec finish was applied along with new coping, new polaris cleaner, new salt water chlorine injector, new heater, new sand for the filter, etc. The builder put in 12 gallons...