Recent content by c&c

The way I set up this is system, since it's two bodies of water. I made two schedules. Pool runs first, then about 15 mins later the spa runs. Since they are using the same pump/filter, but they are two different areas and not connected to spill over from spa to pool. This seems to work...

Thank you ajv22! Now, I also see that in the installation manual. That was a bit confusing to me.

Another question, the HPW outdoor transceiver requires the 4 conductor comm. wire to be wired to J7/J8 com port which is different then the install instructions. Please see the pictures to see that J8 is 6 pin com port and the color code is different then indicated on the instructions.

Thanks for the information. It's a single speed whisperflo pump. Actuators will need to be programed depending on pool or spa circuit to rotate to circulate the different body of water.

Hi I'm new here. You all provide great information here. Thanks!!

Hi everyone, I'm new here and very new to pool automation. I'm installing a new Pentair Intellicenter. As you will tell with my questions, I have little to no experience with control panels and automation. 1. How to power the Purex Minimax 400 heater? Do I wire it to one of the relays or...