Recent content by bznstah

Hey, thank you again for the reply. I tested with the half tap water half pool water as you suggested, and got a 60-65 reading, which puts me around 120-130. Is the only solution here draining water? or should I take other steps prior to doing so?

So using the TF-100 kit, instead of 100% pool water I would do 50% Pool / 50% tap?

Thank you for the reply, will definitely be ordering a reagent refill set. Just re-tested and here are my results: pH: 6.8 shade FC: < 0 TA: > 200 (stopped at 20) CYA: > 110

Hi all, I opened my pool last week and it has green algae (33k galloon inground vinyl pool). I ignorantly decided to shock the pool a couple of times prior to testing the water, and it got a lot cleaner, but then I got 3 days of non-stop rain. Pool is clean of all debris, but still pretty...

I received my TF-100 kit and tested for the first time. The pool is looking a lot cleaner after dumping 3 128oz bleach jugs at night since posting (4 days), but now I plan on starting the SLAM process for crystal clear water hopefully. My current results of the test are the following: pH...

Thanks for the replies. I ordered the TF-100 kit last night and will be purchasing lots of liquid chlorine today and start dumping until I receive the kit. Based on PoolMath app 3 128oz gallons a day. Once I receive the kit, I'll post again with accurate readings and start the SLAM process...

Hello all, I've been a pool owner for 1 month, and I have been treating my pool based on the recommendation of the local pool store and I've been spending well over $150 every visit. Even with the excessive amount of supplies from the pool store, I still can't get my pool water crystal clear...