Recent content by bobsmit

My manual vacuum goes directly to the filter. I do also have a robotic vacuum that has its own collector. Quickly realized the robotic vacuum was useless for this job, so I have been using the manual vacuum. Appreciate the tip!

FC is a bit low from me adding lots of water today. Low level from waste vacuuming + a leak. Had to add about 25% total volume of fresh water. I will restart the SLAM process tonight. Appreciate the assistance.

FC: 3 CC: 0 Calcium Hardness: 300ppm Total Alkalinity: 140 CYA: 60 PH: 7.5 CL/BR: 3/6 Yes, I had been maintaining according to the chart. I had also been following the slam process and met all the criteria (Note: Water had always been clear, but with accumulation at bottom of pool. Had brushed...

Hi Everyone, I'm hoping someone can point me in the right direction as I'm at a loss here. I'm not sure what I'm battling with here, but I assume it has to be some type of algae at this point. Setup: Coleman Above Ground Pool 22'x52" Intel Krystal Clear Sand Filter Pump & Saltwater System...

Thanks for the information. On a side note, our pool looks identical to yours. Have you had any issues with the windows leaking?

Hi All, We are getting ready to set up our first pool and I've been doing some research on the forums. I decided that I wanted to add a through-wall skimmer right off the bat. I've found numerous threads on the install process, but none answered a question I had. Currently, my pool is still in...