Recent content by bhenderson0413

  1. bhenderson0413

    New Re-Plaster...potential REPAIR on Sun Deck

    Thanks for the reply, I appreciate it...as we brush more and the dust begins to dissipate we have seen a few other issues as detailed in the pics. Don't want to over-react to common issues, so that's why I value the insight of the forum members.
  2. IMG_0379.jpg

    IMG_0379.jpg

  3. IMG_0373.jpg

    IMG_0373.jpg

  4. bhenderson0413

    New Re-Plaster...potential REPAIR on Sun Deck

    All, We just had a re-plaster and have been extremely pleased with the pool company and their work...EXCEPT I noticed these depressions/bowls around the bubblers and umbrella in the sun deck during my 2-3 hours a day of brushing. The foreman returned and essentially said they put too much...
  5. IMG_0325.jpg

    IMG_0325.jpg

  6. IMG_0324.jpg

    IMG_0324.jpg

  7. IMG_0231.jpg

    IMG_0231.jpg

  8. bhenderson0413

    Pentair Whisper Flo Pump Leaking & Hot

    I had the same exact issue with a leak in the same location, replaced everything but the impeller and the seal plate. I don't think the impeller would contribute to the leak in that location. Has anyone had to replace a seal plate to eliminate a leak or would this be a waste of money? The...
  9. bhenderson0413

    Pentair 2 HP Whisperflo Pump Leaking

    Can't argue with the pic….leak free. Apparently I got a bad pump seal, which is somewhat rare according to what I've read…back in business. Thanks again to TFP.
  10. photo-2.JPG

    photo-2.JPG

  11. bhenderson0413

    Pentair 2 HP Whisperflo Pump Leaking

    Keven, I took the pump apart again yesterday and there was an obvious discoloration beneath the shaft seal on the seal plate. I went back to the pool store to get a new seal and they immediately wanted to sell me a new seal plate assuming the plate was cracked. After we cleaned it up, we...
  12. bhenderson0413

    Pentair 2 HP Whisperflo Pump Leaking

    Absolutely only use silicone, but I did use glue in a few spots around the flat part of the gasket at the corners to help it conform and hold it in place during installation. None of the glue would have been exposed to the adjoining part. Thanks for the reply.
  13. bhenderson0413

    Pentair 2 HP Whisperflo Pump Leaking

    Thanks for the reply Mark….I've got a follow-up question….the seal plate gasket I replaced was a beige color gasket that I assumed had faded over the years and the seal kit I purchased had a black gasket that was difficult to keep in place. After your reply, I found an almond colored gasket...
  14. bhenderson0413

    Pentair 2 HP Whisperflo Pump Leaking

    All, I have a Pentair Whisperflo 2 HP high performance pump. I would estimate the pump to be about 10 years old. I bought the house a couple of years back and have had zero issues until I noticed some water loss in the pool and discovered my main pump was leaking at the equipment. No noise...