Recent content by aquasphere

Hey Jim - thanks for your reply. Thanks for the help on the EasyTouch. That means that someone added a schedule, and only the PB worked on the unit. So, them... We do plan to add a relay that the actuator/valve is closed unless the pool cover is wide open. To my other questions, though, should...

Pentair setup. EasyTouch Control System. PB installed all equipment and setup everything. I have changed nothing, nor done any setup. I turn on/off the lights on the panel and from the app. That's it. Indoor pool. Covered with a Coverstar cover when not in use. Waterslide was not finished at...

Building an indoor pool here on the northern plains. 20x40 vinyl liner with steel benches and stairs Pentair fixins': CCP320 filter, 3HP 230v Intelliflo pump, Mastertemp Heater 250k BTU NG, 6 Glow bright lights, Intellichem controller, UV Bio-Shield Endless Swim Fastlane Salt Water Generator...

So, our goal of a 4 feet deep shallow end is within that requirement. So, the issue sounds like a limitation of the steel/vinyl pool design that we've been provided. Anyone have experience with depth limitations of steel/vinyl pools? Are their pool walls that are taller than 42"? What's the tallest?

I'm not sure if they are referring to non-compliant with their company standards or building code, but I see their point... Basically, there is a 14 inch deep by 14 inch long slope right at the edge of the floor of the shallow end. So, if you step down into the pool, that ledge is going to cause...

We are working with one of the nationals to design a vinyl/steel pool for an indoor residential application (our home). We want a 36" shallow end, a 60" "deep well" in the middle, and a 48" shallow end on the other side of that. (All depths water depth. The waterline will be 6" below the deck.)...