Recent content by antcoster

Yesterday I installed a new rubber gasket under the liner one of the main drain that I believed was the leaker. In 20 hours, I have lost no water at all. Hoping this is now fixed.

With the amount of wrinkles that are on the liner in this area, will a patch even work?

After some further investigating, there are no gaskets between the main drains & the Liner itself. Using the small tube attached to the leak detection syringe, I can actually push that hose between the two( liner & main drain itself). Last gasp is it try and insert a gasket in between the MD &...

Everything about these drains just say to me crappy craftsmanship by the company that replaced the liner 2 years ago.

My main drain covers are Hayward WG1048E2. My skimmer is Hayward SP1082 or 1083. Too cold to jump in the pool today to check out the drains. If it warms up this week I’ll jump in. The pool itself is pretty small. 10x20, 6000 gallons. 3-5.5 ft deep is all it is. It’s considered a pocket pool...

My plan is to take care of it. I tightened all the screws that hold the drain top plate down but have slowed it down considerably. I lost 1/4” of water overnight instead of an inch or more. Would you replace the wrong screws with the correct one? Do I wrap all the screws with Teflon tape and...

I’d appreciate if someone with some experience can look at this liner. Backstory is, I bought a house, 3/2024, and rented the house out until November. I hired a pool care tech that came recommended from my real estate agent. Right from the get go, he was telling me the liner & pool had issues...