Was thinking more along the lines of turning the spa on on the way home kinda thing. Not worried about other folks. Kids are outta the house and wouldn’t do anything if, say, my wife was home and in the pool. But this helps regardless
The app is specific to the Aqualogic/Prologic controllers. Jandy equipment is likely to have different control codes but something similar might be possible.I'm just tuning into this thread, and I'm wondering if this will help me mitigate the fact that I have a working Aqualink RS-4 Combo, but I have no user interface for it to actually program the schedules, etc. I think the main remote was thrown out during the renovation of my home before I moved in. I do have the Ethernet/wifi iAquaLink 2.0 but I do not like the mobile app, it is very flaky! I also have aqualinkd from Github running on a Raspberry Pi and it is actually working (I use Home Assistant for home automation for those familiar with that, and there is an integration for Aqualink using the aqualinkd project on Github), allowing me to control the filter pump, heater etc. I hope to look at this more in depth in the next day or two. If this lets me avoid hunting on ebay for whatever piece of hardware that Jandy wants $$$ for at this point, that would be awesome. It looks like some awesome work Mark!
I am in the process of submitting the app to the Windows Store to make installation easier. I will let you know when that is ready.Hey folks, been reading for a while and have decided to give this process a go. I downloaded the windows installer, but am having a lot of security issues where it doesn't seem to want to allow an install - is there a trick to that? Hoping this will work for my PS-4, we shall see.
Thanks for all the hard work to this point.
Been there. Be patient.Ended up finding a RAR at http://ftp.hi-flying.com:9000/IOTService/ and got things set up. Download took a alooooong time but Malwarebytes passed it.
Then fell prey to the unlogical nature of Cat 5 ethernet cable swapping cable to pin layouts. Logic would say coloring should be white/orange, orange, white/blue, blue, white/green, green, white/brown, brown, right? Nope. swap white/blue and white/green...... Started raining before I could get things swapped out so will have to wait to make the fix. Good news is the EW1 connects to my wifi so should just be a cable swap.
Thanks Mark,I am in the process of submitting the app to the Windows Store to make installation easier. I will let you know when that is ready.
It sounds like it could be that the controller is not recognizing the default key commands. When I read through the forum comments, I could not find a reference that they are different but I may missed it:Doesn't seem to accept input from me though, so I can't seem to turn anything on/off. Maybe some difference between PS4 and PS8?
I am having the same exact issue. Got my white/green cable swapped to the white/blue, and am seeing the text from the display, but will not accept any input from me either. IOS app on a AQL-PS8Thanks Mark,
I went straight to the iOS app and think I am making progress - got the EW11 up, script loaded, and on the app I do get the feedback messages from what is on the LCD display. The status changes as the filter pump kicks on as well. Doesn't seem to accept input from me though, so I can't seem to turn anything on/off. Maybe some difference between PS4 and PS8?