I just bought a 2-speed Century pump motor B2975 (230v) It did not come with a switch . I want to wire a HI-OFF-LO toggle switch (815-4011B by Waterways) into the motor.
Wires that provide power from the electrical panel are:
2 brown wires carrying 115v each
1 green ground wire
The top of the terminal board has an L1, L2, A, and Ground.
Coming in from the motor to the UNDERSIDE of the terminal board are the following:
1 white wire to A
2 yellow wires to L1
1 yellow w/black stripe to L2
The toggle switch has 3-positions and 3-blades:
Position 1 (HI) has a black wire
Position 2 has a purple wire
Position 3 (LO) has a yellow wire
What goes to what? I am lost right now
Wires that provide power from the electrical panel are:
2 brown wires carrying 115v each
1 green ground wire
The top of the terminal board has an L1, L2, A, and Ground.
Coming in from the motor to the UNDERSIDE of the terminal board are the following:
1 white wire to A
2 yellow wires to L1
1 yellow w/black stripe to L2
The toggle switch has 3-positions and 3-blades:
Position 1 (HI) has a black wire
Position 2 has a purple wire
Position 3 (LO) has a yellow wire
What goes to what? I am lost right now
