I have a 2 speed pump and was given an Intermatic PE153 from a friend that I have hooked up yet. I am going to be adding a SWG soon (AquaRtie w/ T-15). I need some input on wiring these things together.
Here is the info about the timer http://www.poolandspacontrols.com/~/media/Files/PoolAndSpaControls/Products/Instructions/PE153.ashx
I was thinking of running the timer in Mode 4. (High Pump, Low Pump, Cleaner Pump)
Having the pump obviously 1 = High 2 = Low and then the SWG on 3.
Using the timer in this mode will ensure the SWG is never on unless the pump has been running at least one minute per the manual.
I then found this post http://www.troublefreepool.com/whis...c-pe153-digital-timer-t24065.html?hilit=pe153
And deducted I need to wire as follows.
Power comes in on 1 & 2.
Common of motor goes to 1 with power in.
High speed wire on motor goes to 4.
Low speed wire on motor goes to 6.
SWG Common goes to 1 with power in
SWG load goes to 8
A jumper goes from 2 to 3.
A jumper goes from 3 to 5.
A jumper goes from 5 to 7
Any one out there that know more about electricity confirm this and does the Hayward Aquarite run on 240V so this will all wire together?
So for the rambling Thanks in advance.
Here is the info about the timer http://www.poolandspacontrols.com/~/media/Files/PoolAndSpaControls/Products/Instructions/PE153.ashx
I was thinking of running the timer in Mode 4. (High Pump, Low Pump, Cleaner Pump)
Having the pump obviously 1 = High 2 = Low and then the SWG on 3.
Using the timer in this mode will ensure the SWG is never on unless the pump has been running at least one minute per the manual.
I then found this post http://www.troublefreepool.com/whis...c-pe153-digital-timer-t24065.html?hilit=pe153
And deducted I need to wire as follows.
Power comes in on 1 & 2.
Common of motor goes to 1 with power in.
High speed wire on motor goes to 4.
Low speed wire on motor goes to 6.
SWG Common goes to 1 with power in
SWG load goes to 8
A jumper goes from 2 to 3.
A jumper goes from 3 to 5.
A jumper goes from 5 to 7
Any one out there that know more about electricity confirm this and does the Hayward Aquarite run on 240V so this will all wire together?
So for the rambling Thanks in advance.