Hello...
So I have read some interesting ideas here about remoting my pool / heater. The setup is not close to the house and I am hoping to remote control these systems. Pool pump and heater come off same breaker/mech timer (the timer func I do not use ) . 2 sets of 220 come out of the box to the pump and heater separately. I found this remote switch https://www.amazon.com/gp/product/B08VS7SRHN/ref=ask_ql_qh_dp_hza and wondered if 2 of them might be installed to control each device separately. This way when it's time to shut things down we can shut off the heater, wait a few and then the shut down the pump. I know the heater has pressure sensor and will not start without pressure from a running pump. Any ideas or suggestions ? Trying to do this on the economic side without rewiring the existing box.
Thanks in advance !!!!
So I have read some interesting ideas here about remoting my pool / heater. The setup is not close to the house and I am hoping to remote control these systems. Pool pump and heater come off same breaker/mech timer (the timer func I do not use ) . 2 sets of 220 come out of the box to the pump and heater separately. I found this remote switch https://www.amazon.com/gp/product/B08VS7SRHN/ref=ask_ql_qh_dp_hza and wondered if 2 of them might be installed to control each device separately. This way when it's time to shut things down we can shut off the heater, wait a few and then the shut down the pump. I know the heater has pressure sensor and will not start without pressure from a running pump. Any ideas or suggestions ? Trying to do this on the economic side without rewiring the existing box.
Thanks in advance !!!!
