We are installing a 16 x 32 Hydra pool with a Cozy Cove, and a pool contractor is helping us with the dig, installation of the pool bottom, liner and concrete. He has no experience with Cozy Coves, however. We decided to install the jets about 4 inches above the bottom of the divets in the Cozy Cove (see picture). We thought it might be nice to have the water spray on the middle part of our backs. But now, we think that was a mistake. We realized after looking at Hydra’s sample Cozy Cove picture (see attached), they put the jets at the bottom of the divets, and the water barely covers them. We are concerned that we won’t be able to keep the water level high enough to cover the jets if we leave them where they are. Should we move them down? If so, what should we use to patch the extra holes we made? If we do this, we need to do it now because we’re about ready to put in the rock and concrete! We really need some advice! Thank you!
[attachment=1:3b9utc0z]Cozy Cove jets.jpg[/attachment:3b9utc0z]
[attachment=0:3b9utc0z]cozy-cove-spa.jpg[/attachment:3b9utc0z]
[attachment=1:3b9utc0z]Cozy Cove jets.jpg[/attachment:3b9utc0z]
[attachment=0:3b9utc0z]cozy-cove-spa.jpg[/attachment:3b9utc0z]