Hey Guys,
In the process of re-pluming my setup to get the SWG installed.
All my pluming is connected with PVC Cement. Even to the Valves, so I need to cut all the plumbing out and redo.
I have a Hayward 3port with 1 from the Skimmer, 1 from the Bottom Drain, then going into the pump. All 1-1/2"
I was reading that some recommended the Jandy 3 Port, but I was a bit confused to if it would work, since the ports show Inlet, ( I have 2 Inlet) and then Cleaner/Skimmer.
I would assume that this Jandy would be okay, but I would plumb the Skimmer to Skimmer, and Bottom Drain to Cleaner, and then do Inlet going to the Pump.
This sound correct?
Thanks again, definitely going to become a TFP Supporter since doing this project.
In the process of re-pluming my setup to get the SWG installed.
All my pluming is connected with PVC Cement. Even to the Valves, so I need to cut all the plumbing out and redo.
I have a Hayward 3port with 1 from the Skimmer, 1 from the Bottom Drain, then going into the pump. All 1-1/2"
I was reading that some recommended the Jandy 3 Port, but I was a bit confused to if it would work, since the ports show Inlet, ( I have 2 Inlet) and then Cleaner/Skimmer.
I would assume that this Jandy would be okay, but I would plumb the Skimmer to Skimmer, and Bottom Drain to Cleaner, and then do Inlet going to the Pump.
This sound correct?
Thanks again, definitely going to become a TFP Supporter since doing this project.