Vacation > Only Spa Mode?

Jump to latest Follow Reply
Tungsten51

Tungsten51

Well-known member
Jun 19, 2023
83
DFW
Pool Size
29000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
CircuPool RJ-60 Plus
We came back from vacation and it seems that the Spa is running all the time, even if I turn it On/Off via the PDA and when putting it in service mode and then going back to Auto. The normal return jets are not running but the skimmer baskets do seem to be working.

Any help is appreciated.
 
Sounds like your RETURN actuator may not be turning properly and is stuck in the spa position.

Post pics of your equipment pad and valves.
 
ajw22 said:
Sounds like your RETURN actuator may not be turning properly and is stuck in the spa position.

Post pics of your equipment pad and valves.
Click to expand...
Thanks. Check these out. It's technically in Pool Filter mode but spa jets are running
 

Attachments

  • PXL_20230730_013150325.jpg
    PXL_20230730_013150325.jpg
    409 KB · Views: 38
  • PXL_20230730_013146561.jpg
    PXL_20230730_013146561.jpg
    644.9 KB · Views: 6
  • PXL_20230730_013141565.jpg
    PXL_20230730_013141565.jpg
    529.5 KB · Views: 6
This actuator is in SPA mode. The other is in POOL mode.

Find the toggle switch on the side of the actuator. It has three positions - ON1-OFF-ON2

Flip the toggle to the other way and report if the actuator turns.

pxl_20230730_013150325-jpg.518297
 
ajw22 said:
This actuator is in SPA mode. The other is in POOL mode.

Find the toggle switch on the side of the actuator. It has three positions - ON1-OFF-ON2

Flip the toggle to the other way and report if the actuator turns.

pxl_20230730_013150325-jpg.518297
Click to expand...
OK, which actuate? Sorry, more details
 
ajw22 said:
This actuator is in SPA mode. The other is in POOL mode.

Find the toggle switch on the side of the actuator. It has three positions - ON1-OFF-ON2

Flip the toggle to the other way and report if the actuator turns.

pxl_20230730_013150325-jpg.518297
Click to expand...
Should I turn the actuator in SPA mode to Suction?
 
Tungsten51 said:
We came back from vacation and it seems that the Spa is running all the time, even if I turn it On/Off via the PDA and when putting it in service mode and then going back to Auto. The normal return jets are not running but the skimmer baskets do seem to be working.

Any help is appreciated.
Click to expand...
What's also weird is that I have the filter programmed to turn off at 9pm but it's still running, even though it's past 9pm. None of this happened prior to last week.
 
Tungsten51 said:
What's also weird is that I have the filter programmed to turn off at 9pm but it's still running, even though it's past 9pm. None of this happened prior to last week.
Click to expand...
Have you checked the date and time in Aqualink?
 
Last edited:

Enjoying this content?

Support TFP with a donation.

Give Support
ajw22 said:
This actuator is in SPA mode. The other is in POOL mode.

Find the toggle switch on the side of the actuator. It has three positions - ON1-OFF-ON2

Flip the toggle to the other way and report if the actuator turns.

pxl_20230730_013150325-jpg.518297
Click to expand...
OK, I flipped the switch on the bottom of the actuator and it did NOT move but the other one did. Is it a bad actuator?
 
Last edited:
The amps don't matter. The size does matter.

The switch is an Omron Basic/Snap Action Switches SS-5T that can be bought at Mouser.
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply