Chem geek,
Uv was unplugged 3 days ago. I believe this is why I have been able to keep FC levels. My CYA before this was 45 so even if +/- factor of 10, the FC target level has been excessed for 2 days. Are you say I may need to raise this target higher than CYA/FC chart. Then how do I determine the correct target? What level should I raise the Fc to? There has been no bather load for 2 weeks. water temp 82, that leaves Sun UV & organics. so if we can't measure or rely on the incomplete oxidation as CC due to the addition of more Chlorine releasing any that maybe bound then are there any or factor to look for? I have tested for ammonia----none. My CYA is constant. what am I missing. The backyard smell of a chlorine factory & my family is calling me the chlorine man….water is crystal clear.. but I can not now just maintain the <1ppm overnight loss to complete SLAM. Does the high Nitrate level interfere with chlorine? Thanks
Uv was unplugged 3 days ago. I believe this is why I have been able to keep FC levels. My CYA before this was 45 so even if +/- factor of 10, the FC target level has been excessed for 2 days. Are you say I may need to raise this target higher than CYA/FC chart. Then how do I determine the correct target? What level should I raise the Fc to? There has been no bather load for 2 weeks. water temp 82, that leaves Sun UV & organics. so if we can't measure or rely on the incomplete oxidation as CC due to the addition of more Chlorine releasing any that maybe bound then are there any or factor to look for? I have tested for ammonia----none. My CYA is constant. what am I missing. The backyard smell of a chlorine factory & my family is calling me the chlorine man….water is crystal clear.. but I can not now just maintain the <1ppm overnight loss to complete SLAM. Does the high Nitrate level interfere with chlorine? Thanks
Last edited: