Trying to diagnose a Hayward RS750 pump

Jump to latest Follow Reply
Called a pool service company today and described my problem to them. They suggested testing the voltage going to the motor. If it was 230, then they suggested replacing the motor. Sound reasonable? I'll call a couple other places just to get a consensus.

Also, looking at motors, would item # UST1072 or #CT1072 at http://www.electricmotorwarehouse.com/56Jframe.htm be my replacement motor, depending on whether I went with an energy efficient one or not?

My current motor is shown at http://www.linzarni.net/pool/RS750 Spec.jpg
 
Quick update. I finally measured the voltage going to the motor only 120V is getting to it. Upon further inspection, I believe I have faulty wiring going on one of the lines. I've called my contractor to take it from there. I'll provide an update once all is up and running again.. Spishex, definitely appreciate all your advice on this thread!
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply