- May 12, 2013
- 2
I'm new at this but read and reviewed A LOT before I started. Needing a little more help. We have an approx 15x30 vinly inground pool, approx 20,500 gallons.
We opened our pool on May 6th, it's been 6 days. Initially was very GREEN & couldn't see bottom at all. It is no longer green, can see bottom, however it is still slightly cloudy, definitely not crystal clear.
We used Dichlor and Cal/Hypo as shock to start up (left over supplies we are using up)
Today chemicals are
FC =11
CC =1
TC = 12
TA= 110
PH = 7.4
CYA = 60
CH - 270
(wondering if I need to purchase some Liquid Chlorine and shock higher to get rid of cloudiness) or test for other things at pool store??
Any suggestions??
Thanks,
Lisa
We opened our pool on May 6th, it's been 6 days. Initially was very GREEN & couldn't see bottom at all. It is no longer green, can see bottom, however it is still slightly cloudy, definitely not crystal clear.
We used Dichlor and Cal/Hypo as shock to start up (left over supplies we are using up)
Today chemicals are
FC =11
CC =1
TC = 12
TA= 110
PH = 7.4
CYA = 60
CH - 270
(wondering if I need to purchase some Liquid Chlorine and shock higher to get rid of cloudiness) or test for other things at pool store??
Any suggestions??
Thanks,
Lisa