Transportation of sliding pool enclosure

[steveb21]

Hi
I have purchased a used sliding pool enclosure.

4 sections - each are 2.5m wide
The largest section is 5.7m in length. The other 3 sections slide/fit underneath.

Aluminium framing with clear polycarbonate sheets.

I need to move the cover some 100 miles away, a hourney of alprox 2 hours via motorway at 60mph.

Looking at transporting it via a flat bed lorry, stacking the 4 sections and having them strapped down.

Concern i have is that there will be vibrations during transportation. I am under the impression that (unlike glass) polycarbonate is a pretty strong material.

Thoughts please?

 

[wireform]

I think careful planning is needed here. You'll have to isolate the stacked enclosure between the layers so they don't self destruct. Perhaps sections of 2 inch rigid insulation between the layers.

 

[Newdude]

Consider transporting them upright like they were glass. It's probably not needed for damage but it's another possibility if they don't fit the truck well laying flat.