A few days ago I noticed salt level on controller said 2900ppm. I didn't have any to add, until 2 days later when I was getting errors on my Blue Haven /Hayward controller...CHLORINATOR OFF/TEST SALT LEVEL, CHECK SYSTEM/VERY LOW SALT and INSTANT SALT/CHLORINATOR OFF.
I added 2x40lbs, no change overnight. Brought a water sample to pool store, they said it was 4000, surprisingly.
So I took the T15 off, looked clean, but I acid washed it anyway, no change.
I can't get any voltage or amperage readings. How do I confirm my cell is dead?
Number on my cell is 3E12199, reading that means 2012day199 [mid August], so almost 9yrs old. Not bad at all, but I want to make sure nothing else is bad.
I added 2x40lbs, no change overnight. Brought a water sample to pool store, they said it was 4000, surprisingly.
So I took the T15 off, looked clean, but I acid washed it anyway, no change.
I can't get any voltage or amperage readings. How do I confirm my cell is dead?
Number on my cell is 3E12199, reading that means 2012day199 [mid August], so almost 9yrs old. Not bad at all, but I want to make sure nothing else is bad.