I have The Pool Cleaner 4x. It is not climbing the walls and seems to go slow. Please see pic of plumbing below.
What is your opinion on the plumbing? Did the PB plumb it right? Also, should I turn off the 2 valves on the 2 skimmers and valve for low suction so only the dedicated suction line is open to increase speed for The Pool Cleaner 4x?
The pump will be a dual speed Hayward Tristar 1.5 hp. The PB installed the wrong pump (single speed Hayward Tristar 1.5 hp) and will be putting in the new one when it arrives.
Starting from left to right:
-first pvc pipe is the Return that leads to 3 returns in the pool
-the next is the Sheer Desent (turned off)
-the next leads to 2 Low Water Suctions (no main drain)
-the next is a skimmer
-the next is the dedicated suction for cleaner
-the last is a skimmer
The next question I have is how to run the (2) 16 inch sheer descents. Should I turn off the valve for the returns so just the sheer descents are running to maximize flow?
What is your opinion on the plumbing? Did the PB plumb it right? Also, should I turn off the 2 valves on the 2 skimmers and valve for low suction so only the dedicated suction line is open to increase speed for The Pool Cleaner 4x?
The pump will be a dual speed Hayward Tristar 1.5 hp. The PB installed the wrong pump (single speed Hayward Tristar 1.5 hp) and will be putting in the new one when it arrives.
Starting from left to right:
-first pvc pipe is the Return that leads to 3 returns in the pool
-the next is the Sheer Desent (turned off)
-the next leads to 2 Low Water Suctions (no main drain)
-the next is a skimmer
-the next is the dedicated suction for cleaner
-the last is a skimmer
The next question I have is how to run the (2) 16 inch sheer descents. Should I turn off the valve for the returns so just the sheer descents are running to maximize flow?