Well that many drops is only 9ppm of FC, so not that high. Should do the test with 10ml and finish it out.
Test can't be right
- Thread starter shutch
- Start date
I just took another test and it was a 10 ml test with one scoop...which took 45 drops before turning clear. Then I added five drops of 003, swirled and it took one drop of 871to turn clear again? Does this sound right?
- May 3, 2014
- 58,816
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I've never seen any brand of bleach that was at least 6% or better NOT have it printed on the label. If it is not, I would assume it's 3%.
- May 3, 2014
- 58,816
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Regardless, you do not want to use Clorox bleach, especially that one. Splashless means foamy pool water.
Yeah, we figured that out the hard way. ? But it's all good. Except for another plumbing issue by the skimmer and another drain down. ? Was looking on track tho and we'll get back there quickly. But, I also got a good deal on gallon jugs of 10% chlorine...?