Hi, I have a 24' above ground pool. 14,000 (and some) gals. Had one for about 5 years. Last year, disaster. Total collapse...., long story.
Now., New pool in place. Really want to "do it right" this time around.
Just filled with well water. Taylor test kit is on it's way.
Using a Haywood 1 hp pump. Have been, and am again, using 20'X2' passive soloar panels (2).
Very basic pool set up.
One question first and foremost is:
My pump runs normally at 20psi with panels in use, about 18psi with panels bypassed. I think when we had our first pool, (different 1 hp pump) it ran at 10psi, (with bypassed panels and about 13psi with panels in use). The pump motor is rated at 30 working psi max.
Is there anything I should be aware of or do?
Thanks,
Looking forward to learning and sharing on this forum
Now., New pool in place. Really want to "do it right" this time around.
Just filled with well water. Taylor test kit is on it's way.
Using a Haywood 1 hp pump. Have been, and am again, using 20'X2' passive soloar panels (2).
Very basic pool set up.
One question first and foremost is:
My pump runs normally at 20psi with panels in use, about 18psi with panels bypassed. I think when we had our first pool, (different 1 hp pump) it ran at 10psi, (with bypassed panels and about 13psi with panels in use). The pump motor is rated at 30 working psi max.
Is there anything I should be aware of or do?
Thanks,
Looking forward to learning and sharing on this forum