Slow drip leak on a pvc junction.

[Topfox]

Hey everyone,

I’m sure there is a simple answer here, but just found one junction point near my filter that has a small drip going on. What’s the best way to fix this. It’s very very slow drip. Do I need to cut the pipe off and redo it or is there another solution?

Thanks

 

[Bperry]

Hey everyone,

I’m sure there is a simple answer here, but just found one junction point near my filter that has a small drip going on. What’s the best way to fix this. It’s very very slow drip. Do I need to cut the pipe off and redo it or is there another solution?

Thanks

That’s the best way. Depending on if the leak is on the suction side or pressure side you could try some marine epoxy. It likely won’t hold on the pressure side very long.