SLAM Process - CC Levels Are Still High

Mar 30, 2015
60
Cleveland, Ohio
I opened our pool about a week ago and the water was pretty dirty, so I started the SLAM process. I've been maintaining my FC levels overnight and the water looks nice and clear, but the CC levels are high now. Yesterday, I got a 2 and then got as high as 3. This morning, it dropped down to a 2 again. Basically, I need to keep SLAMing until I see the CC levels come down on their own, right?

Here are the numbers from this morning:

FC: 13 (added liquid chlorine to get to 12 last night, but may have slightly miscalculated)
CC: 2

Other stats from before I started SLAM:

CYA: 30 (I know this is a bit on the low side... I plan on raising it to 40-50 after the SLAM is over)
pH: 7.5
TA: 110
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.