Recent swg conversion this may with a new unit from discountsaltpools. Everything has been working well up till this week. Started getting a light on the alert panel. And isn't producing chlorine or bubbles in the cell. I removed the cell and cleaned it per the manual this past weekend. And still getting the light on after a few hours of use. Everything is in balance with the pool with tfp guides. Holding 10psi at the filter and cell is full with no air bubbles. Salt is a little high at 3400-3500ppm. I don't know what else it could be unless it's cell or control board related. Any tips or help would be great. Really hope it isn't a sign for up coming issues as it has been painless since the conversion.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk