Last weekend, we opened our BBB pool to clear water. This was our first year with a Loop Loc Ultra Mesh cover and there was only some fine silt on the bottom which went though the mesh. We brought it up to shock level based upon the CYA level and will let it come down to normal level before we turn on the SWG.
Here are the current test results:
FC=14
CC=0
PH=7.2
TA=60
CH=50
CYA=50
Borates=15
Temp=69
Should I use some 20 Mule Team borax now to raise the PH up to my target level of 7.5 or just let the PH creep up on its own? I'm thinking since I need to add borates anyway, it would not hurt to do this. Any opinions would be appreciated.
Here are the current test results:
FC=14
CC=0
PH=7.2
TA=60
CH=50
CYA=50
Borates=15
Temp=69
Should I use some 20 Mule Team borax now to raise the PH up to my target level of 7.5 or just let the PH creep up on its own? I'm thinking since I need to add borates anyway, it would not hurt to do this. Any opinions would be appreciated.