Salt too high?

[CeeDee]

Installed my new Circupool Edge-40 and all is working well, but I got my Taylor salt test kit today and the current salt level is coming back at around 4000 ppm. Aquachek strips read 3640. The Edge 40 manual says to get the salt to 3500 ppm. Am I okay at 4000 or should I replace some water?

Other readings seem good:

pH = 7.4
TA = 60
CYA = 60 (want to get this up to 70)

 

[cowboycasey]

4000 is good for circupool just don't add any more

70 CYA would be a good fit for your location

 

[OHcabanaboy]

I just started my RJ30 today. My K-1766 kit tested at about 2800. My display for current salinity showed about 2600 and the low salt light was blinking. I'd say run the system and see how it acts.
BTW, on my RJ the suggested range was 3-4,000ppm with a 3500 target.