I recently had an issue with my Aquarite salt generator. I perused the forum and found this thread which seems to offer the best recommendations:
http://www.troublefreepool.com/threads/17562-Aquarite-Not-generating-lights-not-on
I have purchased the defective part-there were burn marks on the brown spacer-like pieces between the board and the top of the resistor, so I imagine that is the culprit.
The question I have is the resistor does not come with the spacers. Do I need to get these spacers for the resistor or can I just remove and resolder the resistor without them? If I do need the spacers, where can I get those as well? Digikey?
Also, the thread I mention refers to a different resistor; I orders one that has the same number on the one that is on my mother board.
Thanks in advance.
http://www.troublefreepool.com/threads/17562-Aquarite-Not-generating-lights-not-on
I have purchased the defective part-there were burn marks on the brown spacer-like pieces between the board and the top of the resistor, so I imagine that is the culprit.
The question I have is the resistor does not come with the spacers. Do I need to get these spacers for the resistor or can I just remove and resolder the resistor without them? If I do need the spacers, where can I get those as well? Digikey?
Also, the thread I mention refers to a different resistor; I orders one that has the same number on the one that is on my mother board.
Thanks in advance.