I’ve come across some old threads regarding the no flow error codes showing up on my Jandy Aqualink 1400 and I was able to find the salinity button behind the circuit board but my stupid question is, do I need to shut off all power first before holding down the button for 5 seconds or should power be on? I know it’s basic but want to make sure I get it right.
Resetting Jandy Aqualink Salinity button
- Thread starter Poolio Iglesias
- Start date
- Jul 21, 2013
- 52,806
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Power needs to be on so the system will beep at you.
www.troublefreepool.com
Power needs to be on so the system will beep at you.
Jandy AquaPure SWG - Further Reading
www.troublefreepool.com
Thank you so much! I did it with the power off just due to fear but I now realize that it would’ve done nothing and makes sense why I still have the error!Welcome to TFP.
Power needs to be on so the system will beep at you.
Jandy AquaPure SWG - Further Reading
- Apr 10, 2018
- 5,165
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45
