Good afternoon everyone -
I'm an engineer by education but this wasn't in my wheelhouse.
I have two older Jandy HP Plus pumps - 2HP for 18k gal pool to filter through CV340 filter equipment.
I also have a 1/2HP to run three spillover fountains.
The whole system is ran through the iaqaulink RS system.
The fountain pump has failed (10 years old) and it's time for a new one.
Any reason I can't grab a 2.7HP VS pump to run both systems and then use a Jandy actuated valve to divert flow from fountains, filter, or both (and adjust pump speed accordingly)?
I'm an engineer by education but this wasn't in my wheelhouse.
I have two older Jandy HP Plus pumps - 2HP for 18k gal pool to filter through CV340 filter equipment.
I also have a 1/2HP to run three spillover fountains.
The whole system is ran through the iaqaulink RS system.
The fountain pump has failed (10 years old) and it's time for a new one.
Any reason I can't grab a 2.7HP VS pump to run both systems and then use a Jandy actuated valve to divert flow from fountains, filter, or both (and adjust pump speed accordingly)?